International Refereed Papers
  1. Subsequent yield behavior of hexagonal metal with rolling texture
    Yuichi TADANO
    Key Engineering Materials, Vol. 725, pp. 220-225 (2017)
  2. Effect of lattice rotation on hardening behavior of HCP metal
    Takaaki KURISU, Yuichi TADANO, Seiya HAGIHARA
    Key Engineering Materials, Vol. 725, pp. 502-507 (2017)
  3. Quantitative evaluation of deformation twinning behavior in polycrystalline pure magnesium
    Takeshi SOEDA, Yuichi TADANO, Seiya HAGIHARA
    Key Engineering Materials, Vol. 725, pp. 214-219 (2017)
  4. A crystal plasticity modeling considering volume fraction of deformation twinning
    Yuichi TADANO, Yui YOSHIHARA, Seiya HAGIHARA
    International Journal of Plasticity, 84, pp. 88-101 (2016)
  5. Hydrostatic pressure dependent crystal plasticity by homogenization-based finite element method
    Yuichi TADANO, Seiya HAGIHARA
    ISIJ International, 56, pp. 700-707 (2016)
  6. Formability of magnesium sheet with rolling texture
    Yuichi TADANO
    International Journal of Mechanical Sciences, 108-109, pp. 72-82 (2016)
  7. Crystal plasticity analysis of development of intragranular misorientations due to kinking in HCP single crystals subjected to uniaxial compressive loading
    Tsuyoshi MAYAMA, Tetsuya OHASHI, Yuichi TADANO, Koji HAGIHARA
    Materials Transactions, 56, pp. 963-972 (2015)
  8. Molecular chain plasticity model similar to crystal plasticity theory based on change in local free volume and FE simulation of glassy polymer
    Hideyuki HARA, Hironori NADA, Yuichi TADANO, Kazuyuki SHIZAWA
    International Journal of Mechanical Sciences, 93, pp. 120-135 (2015)
  9. Investigation on intragranular stress of Mg including several twin-bands using dislocation-based crystal plasticity and phase-field models
    Ruho KONDO, Yuichi TADANO, Kazuyuki SHIZAWA
    Key Engineering Materials, 626, pp. 246-251 (2015)
  10. Effect of texture on plastic flow localization of FCC polycrystals using homogenization-based polycrystalline plasticity
    Yuichi TADANO, Naoki KUWASHIRO, Seiya HAGIHARA
    Key Engineering Materials, 626, pp. 450-455 (2015)
  11. A phase-field model of twinning and detwinning coupled with dislocation-based crystal plasticity for HCP metals
    Ruho KONDO, Yuichi TADANO, Kazuyuki SHIZAWA
    Computational Materials Science, 95, pp. 672-683 (2014)
  12. Anisotropic deformation induced by spherical indentation of pure Mg single crystals
    Hiromoto KITAHARA, Tsuyoshi MAYAMA, Keita OKUMURA, Yuichi TADANO, Masayuki TSUSHIDA, Shinji ANDO
    Acta Materialia, 78, pp. 290-300 (2014)
  13. Phase-field simulation of static recrystallization considering nucleation from subgrains and nucleus growth with incubation period
    Mayu MURAMATSU, Yoshiteru AOYAGI, Yuichi TADANO, Kazuyuki SHIZAWA
    Computational Materials Science, 87, pp. 112-122 (2014)
  14. Work-hardening behavior of polycrystalline aluminum alloy under multiaxial stress paths
    Kengo YOSHIDA, Asato ISHII, Yuichi TADANO
    International Journal of Plasticity, 53, pp. 17-39 (2014)
  15. Application of finite element method to analysis of ductile fracture criteria for punched cutting surfaces
    Toru TANAKA, Seiya HAGIHARA, Yuichi TADANO, Takuma INADA, Takanobu MORI, Kenji FUCHIWAKI
    Materials Transactions, 54, pp. 1697-1702 (2013)
  16. Plastic flow localization analysis of heterogeneous materials using homogenization-based finite element method
    Yuichi TADANO, Kengo YOSHIDA, Mitsutoshi KURODA
    International Journal of Mechanical Sciences, 72, pp. 63-74 (2013)
  17. Effect of microstructure on mechanical behaviour of castable refractories (analysis using image-based mesoscale finite element model)
    Hidetoshi KAMIO, Seiya HAGIHARA, Yuichi TADANO, Mitsuo SUGAWARA, Tsuneo KAYAMA
    Journal of Technical Association of Refractories Japan, 32, pp. 12-21 (2012)
  18. Quantitative re-examination of Taylor model for FCC polycrystals
    Yuichi TADANO, Mitsutoshi KURODA, Hirohisa NOGUCHI
    Computational Materials Science, 51, pp. 290-302 (2012)
  19. Analysis of shear droop on cut surface of high-tensile-strength steel in fine-blanking process
    Toru TANAKA, Seiya HAGIHARA, Yuichi TADANO, Shuhei YOSHIMURA, Takuma INADA, Takanobu MORI, Kenji FUCHIWAKI
    Materials Transactions, 52, pp. 447-451 (2011)
  20. Crystal plasticity modeling of pure magnesium considering volume fraction of deformation twinning
    Yuichi TADANO
    Magnesium Technology 2011, pp. 279-283 (2011)
  21. Three-dimensional generalized element with quadratic deformation mode for geometrically nonlinear analysis
    Yuichi TADANO
    IOP Conference Series: Materials Science and Engineering, 10, 12246 (2010)
  22. Geometrically nonlinear analyses using 2-dimensional generalized finite element enriched by the quadratic deformation mode
    Yuichi TADANO, Hirohisa NOGUCHI
    Journal of Computational Science and Technology, 4, pp. 11-24 (2010)
  23. Polycrystalline behavior analysis of pure magnesium by the homogenization method
    Yuichi TADANO
    International Journal of Mechanical Sciences, 52, pp. 257-265 (2010)
  24. Influence of twinning deformation and lattice rotation on strength differential effect in polycrystalline pure magnesium with rolling texture
    Tsuyoshi MAYAMA, Kazuya AIZAWA, Yuichi TADANO, Mitsutoshi KURODA
    Computational Materials Science, 47, pp. 448-455 (2009)
  25. Improvement in formability of aluminum alloy sheet by enhancing geometrical hardening
    Kengo YOSHIDA, Yuichi TADANO, Mitsutoshi KURODA
    Computational Materials Science, 46, pp. 459-468 (2009)
  26. A phase-field simulation of nucleation from subgrain and grain growth in static recrystallization
    Mayu MURAMATSU, Yuichi TADANO, Kazuyuki SHIZAWA
    Materials Science Forum, 584-586, pp. 1045-1050 (2008)
  27. A triple-scale crystal plasticity simulation on yield behavior of annealed FCC fine-grained metals
    Eisuke KUROSAWA, Yoshiteru AOYAGI, Yuichi TADANO, Kazuyuki SHIZAWA
    Materials Science Forum, 584-586, pp. 1027-1032 (2008)
  28. Assessment of generalized finite elements in nonlinear analysis
    Yuichi TADANO, Hirohisa NOGUCHI
    Lecture Notes in Computational Science and Engineering, 57, pp. 235-247 (2007)
  29. A polycrystalline analysis of hexagonal metal based on the homogenized method
    Yuichi TADANO, Mitsutoshi KURODA, Hirohisa NOGUCHI, Kazuyuki SHIZAWA
    Key Engineering Materials, 340-341, pp. 1049-1054 (2007)
Conference Proceedings
  1. Effect of rolling texture on plastic flow localization of hexagonal metal
    Yuichi TADANO
    Proceedings of Plasticity 2016, pp. 19-21 (2016)
  2. Large deformation elasto-visco-plastic analysis using particle-based method
    Yuichi TADANO, Yohei YARIMIZU, Seiya HAGIHARA
    Proceedings of 4th International Conference on Computational Methods, Paper ID: 42 (2012)
  3. Multiphysics modeling of deformation twinning in HCP metals based on phase-field approach
    Yuichi TADANO, Ruho KONDO, Kazuyuki SHIZAWA
    Proceedings of KSME-JSME Joint Symposium on Computational Mechanics and Computer-Aided Engineering, pp. 63-68 (2012)
  4. Lattice rotation in magnesium with LPSO structure subjected to compressove loading
    Tsuyoshi MAYAMA, Tetsuya OHASHI, Yuichi TADANO
    Proceedings of 9th International Conference on Magnesium Alloys and their Applications, pp. 1125-1128 (2012)
  5. Multiscale material modeling of hexagonal metals considering deformation twinning
    Yuichi TADANO
    Proceedings of 6th Korea-Japan Workshop on Computational Mechanics, pp. 29-30 (2012)
  6. Plastic flow localization analysis of FCC polycrystals using homogenization-based finite element method
    Yuichi TADANO, Kengo YOSHIDA, Mitsutoshi KURODA
    Proceedings of Plasticity 2012, pp. 64-66 (2012)
  7. A study on compatible generalized finite element for geometrically nonlinear analysis
    Yuichi TADANO
    Proceedings of Design Engineering Workshop 2011, pp. 63-68 (2011)
  8. GN dislocation-crystal plasticity simulation on fine-graining of magnesium based on deformation twinning
    Ruho KONDO, Yuichi TADANO, Kazuyuki SHIZAWA
    Proceedings of Plasticity 2011, pp. 7-9 (2011)
  9. Strain localization analysis of pure magnesium based on crystal plasticity model
    Yuichi TADANO, Tsuyoshi MAYAMA, Mitsutoshi KURODA
    Proceedings of Plasticity 2010, pp. 16-18 (2010)
  10. Shear band formation of hexagonal metal based on crystal plasticity approach
    Yuichi TADANO, Mitsutoshi KURODA
    Proceedings of Plasticity '09, pp. 352-354 (2009)
  11. Numerical study on geometrical hardening for textured aluminum alloy sheet
    Kengo YOSHIDA, Yuichi TADANO, Mitsutoshi KURODA
    Proceedings of Plasticity '09, pp. 358-360 (2009)
  12. Multiscale analysis with polycrystalline homogenization method and comparison with Taylor model
    Yuichi TADANO, Mitsutoshi KURODA
    Proceedings of Third Asian-Pacific Congress on Computational Mechanics, Paper ID: MS17-2-2 (2007)
  13. A triple scale crystal plasticity modeling based on geometrically necessary crystal defects and homogenization method and simulation on size effect for polycrystal
    Eisuke KUROSAWA, Yoshiteru AOYAGI, Yuichi TADANO, Kazuyuki SHIZAWA
    Proceedings of Third Asian-Pacific Congress on Computational Mechanics, Paper ID: MS28-4-2 (2007)
  14. A homogenized polycrystalline finite element analysis of hexagonal metal
    Yuichi TADANO, Mitsutoshi KURODA, Hirohisa NOGUCHI, Kazuyuki SHIZAWA
    Proceedings of Plasticity '06, pp. 466-468 (2006)
  15. Plastic instability analysis of thin-walled tube under tension-pressure combined loading
    Yuichi TADANO, Hirohisa NOGUCHI, Mitsutoshi KURODA
    Proceedings of 11th International Conference on Fracture, Paper ID: 4971 (2005)
  16. An analysis of thin-walled tube under combined loading using different yield criteria
    Yuichi TADANO, Hirohisa NOGUCHI, Mitsutoshi KURODA
    Proceedings of Plasticity '03, pp. 561-563 (2003)
  17. A forming limit diagram for thin metal tube under combined loading
    Yuichi TADANO, Hirohisa NOGUCHI, Mitsutoshi KURODA
    Proceedings of the 7th International Conference on Computational Plasticity, Paper ID: 191 (2003)
  18. An anisotropic visco-plastic analysis of metal tube under internal pressure
    Yuichi TADANO, Hirohisa NOGUCHI, Mitsutoshi KURODA
    Proceedings of the Fifth World Congress on Computational Mechanics, Paper ID: 81099 (2002)
  19. An analysis of metal tube under internal pressure using large strain rate dependent constitutive model
    Yuichi TADANO, Hirohisa NOGUCHI, Mitsutoshi KURODA
    Proceedings of Plasticity '02, pp. 609-611 (2002)